In vitro remineralization by various ion-releasing materials of artificially demineralized dentin: A micro-CT study.

OBJECTIVE: The aim of this study was to evaluate the remineralizing properties of ion-releasing restorative materials on pH cycling-induced carious dentin. METHODS: Fifty sound molars were freshly extracted. The occlusal surfaces were abraded using water-cooled sandpaper (800 grit). The residual crowns were embedded in self-cured acrylic resin with the flat dentin surface exposed. A mesio-distal trench was created using a calibrated 0.5 mm deep occlusal reduction burr, and artificial dentin caries were generated by pH cycling. Then, teeth were randomly assigned to five groups according to the ion-releasing material used. For each sample, micro-CT acquisitions were performed at various intervals. Remineralization was assessed by mean gray value (MGV) measurements after registration and segmentation of the region of interest with 3D Slicer software. One-way repeated-measures ANOVA followed by Tukey's post hoc test was used to investigate the difference in MGVs among the various groups. RESULTS: Only Cention Forte showed significantly increased MGVs after 4 weeks compared to demineralized dentin. MGVs were higher, but not significantly, after placement of the restorative materials, including in the resin composite control group. These results can be explained by the radiopacity of the materials. SIGNIFICANCE: Cention Forte, the material with the highest radiopacity, showed a significant increase in the MGVs of artificially carious dentin after 4 weeks. However, the study of dentin remineralization by micro-CT could be impacted by the radiopacity of the restorative materials used. The relevance of this examination for the study of dentinal remineralization should be investigated.

Transcriptomic and physiological approaches to decipher cold stress mitigation exerted by brown-seaweed extract application in tomato.

Chilling temperatures represent a challenge for crop species originating from warm geographical areas. In this situation, biostimulants serve as an eco-friendly resource to mitigate cold stress in crops. Tomato (Solanum lycopersicum L.) is an economically important vegetable crop, but quite sensitive to cold stress, which it encounters in both open field and greenhouse settings. In this study, the biostimulant effect of a brown-seaweed extract (BSE) has been evaluated in tomato exposed to low temperature. To assess the product effects, physiological and molecular characterizations were conducted. Under cold stress conditions, stomatal conductance, net photosynthesis, and yield were significantly (p ≤ 0.05) higher in BSE-treated plants compared to the untreated ones. A global transcriptomic survey after BSE application revealed the impact of the BSE treatment on genes leading to key responses to cold stress. This was highlighted by the significantly enriched GO categories relative to proline (GO:0006560), flavonoids (GO:0009812, GO:0009813), and chlorophyll (GO:0015994). Molecular data were integrated by biochemical analysis showing that the BSE treatment causes greater proline, polyphenols, flavonoids, tannins, and carotenoids contents.The study highlighted the role of antioxidant molecules to enhance tomato tolerance to low temperature mediated by BSE-based biostimulant.

A dual-omics approach for profiling plant responses to biostimulant applications under controlled and field conditions.

A comprehensive approach using phenomics and global transcriptomics for dissecting plant response to biostimulants is illustrated with tomato (Solanum lycopersicum cv. Micro-Tom and Rio Grande) plants cultivated in the laboratory, greenhouse, and open field conditions. Biostimulant treatment based on an Ascophyllum nodosum extract (ANE) was applied as a foliar spray with two doses (1 or 2 l ha-1) at three different phenological stages (BBCH51, BBCH61, and BBCH65) during the flowering phase. Both ANE doses resulted in greater net photosynthesis rate, stomatal conductance, and fruit yield across all culture conditions. A global transcriptomic analysis of leaves from plants grown in the climate chamber, revealed a greater number of differentially expressed genes (DEGs) with the low ANE dose compared to the greater one. The second and third applications induced broader transcriptome changes compared to the first one, indicating a cumulative treatment effect. The functional enrichment analysis of DEGs highlighted pathways related to stimulus-response and photosynthesis, consistent with the morpho-physiological observations. This study is the first comprehensive dual-omics approach for profiling plant responses to biostimulants across three different culture conditions.

Tissue Characteristics in Endodontic Regeneration: A Systematic Review.

The regenerative endodontic procedure (REP) represents a treatment option for immature necrotic teeth with a periapical lesion. Currently, this therapy has a wide field of pre-clinical and clinical applications, but no standardization exists regarding successful criteria. Thus, by analysis of animal and human studies, the aim of this systematic review was to highlight the main characteristics of the tissue generated by REP. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2000 to January 2022 was conducted. Seventy-five human and forty-nine animal studies were selected. In humans, the evaluation criteria were clinical 2D and 3D radiographic examinations. Most of the studies identified a successful REP with an asymptomatic tooth, apical lesion healing, and increased root thickness and length. In animals, histological and radiological criteria were considered. Newly formed tissues in the canals were fibrous, cementum, or bone-like tissues along the dentine walls depending on the area of the root. REP assured tooth development and viability. However, further studies are needed to identify procedures to successfully reproduce the physiological structure and function of the dentin-pulp complex.

Characteristics of Large Animal Models for Current Cell-Based Oral Tissue Regeneration.

The recent advances in the field of cell-based therapeutics open promising perspectives for oral tissue regeneration. The development of large animal models, which overcome the limits of the rodent models and allow to emulate clinical situations, is crucial for the validation of regenerative strategies to move toward clinical application. Currently, porcine, canine, and ovine models are mainly developed for oral regeneration and their specific characteristics have an impact on the outcomes of the studies. Thus, this systematic review investigates the application of porcine, canine, and ovine models in present cell-based oral regeneration, according to the species characteristics and the targeted tissue to regenerate. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2015 to March 2020 was conducted. Relevant articles about cell-based oral tissues engineering in porcine, canine, and ovine models were evaluated. Among the evaluated articles, 58 relevant studies about cell-based oral regeneration in porcine, canine, and ovine models matched the eligibility criteria and were selected for full analysis. Porcine models, the most similar species with humans, were mostly used for bone and periodontium regeneration; tooth regeneration was reported only in pig, except for one study in dog. Canine models were the most transversal models, successfully involved for all oral tissue regeneration and notably in implantology. However, differences with humans and ethical concerns affect the use of these models. Ovine models, alternative to porcine and canine ones, were mainly used for bone and, scarcely, periodontium regeneration. The anatomy and physiology of these animals restrain their involvement. If consistency was found in defect specificities and cell trends among different species animal models of bone, dentin-pulp complex, or tooth regeneration, variability appeared in periodontium. Regeneration assessment methods were more elaborate in porcines and canines than in ovines. Risk of bias was low for selection, attrition and reporting, but unclear for performance and detection. Overall, if none of the large animal models can be considered an ideal one, they are of deemed importance for oral cell-based tissue engineering and researchers should consider their relevance to establish favorable conditions for a given preclinical cell-based therapeutics. Impact statement This systematic review investigates porcine, canine, and ovine models for current oral cell-based regeneration procedures, and researchers could refer to it for the choice of the most pertinent preclinical model for a given cell-based therapeutics.

Cone beam CT optimisation for detection of vertical root fracture with metal in the field of view or the exomass.

Dose optimisation has been revisited in the literature due to the frequent use of cone beam computed tomography (CBCT). Although the reduction of the field-of-view (FOV) size has shown to be an effective strategy, this indirectly increases the negative effect from the exomass. The aim of this study was to evaluate the diagnostic accuracy of an optimised CBCT protocol in the detection of simulated vertical root fracture (VRF) in the presence of metal in the exomass and/or inside the FOV. Twenty teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in a human mandible covered with a soft tissue equivalent material, metallic materials were placed at different dispositions in the exomass and/or endomass, and CBCT scans were obtained at two dose protocols: standard and optimised. Five radiologists evaluated the images and indicated the presence of VRF using a 5-point scale. Area under the ROC curve (AUC), sensitivity, and specificity were calculated and compared using ANOVA (α = 0.05). Overall, AUC, sensitivity, and specificity did not differ significantly (p > 0.05) between the dose protocols. In conclusion, optimised dose protocols should be considered in the detection of simulated VRF irrespective of the occurrence of artefacts from metallic materials in the exomass and/or inside the FOV.

The influence of image display systems on observers' preference for visualizing subtle dental radiographic abnormalities.

OBJECTIVE: The objectives of this study were to assess observers' preference for standard screens (SSs) or medical displays (MDs) in visualizing difficult-to-diagnose radiographic dental abnormalities and their preference for dental filter tools when utilized with MD systems. STUDY DESIGN: A retrospective data set of 60 in vivo radiographs consisting of intraoral (n = 20), panoramic (n = 20), and cone beam computed tomography (n = 20) images was created. Three image display monitors, including an SS, an MD, and an MD with 3 dental filter configurations (bone-low density enhancement filter, tooth-high density enhancement filter, and a combined filter representing regular MD), were utilized to assess 4 observers' monitor preferences in detecting radiographically subtle dental abnormalities. The data were analyzed by using binomial distribution. A P value ≤.05 was considered statistically significant. RESULTS: Although observers expressed preference for MD for visualizing some abnormalities when examining intraoral and panoramic radiographs, MD was not preferred for detection of any abnormalities with cone beam computed tomography. There were no significant differences in preference for SS or MD overall (P ≥ .2024). Observers expressed significant preference for the filters in visualizing all but 2 abnormalities (P ≤ .0252). CONCLUSIONS: The use of MD monitors enabled with dental filter tools may be preferred for visualizing certain subtle abnormalities.

Influence of the exomass on the detection of simulated root fracture in cone-beam CT - an ex-vivo study.

OBJECTIVES: To evaluate the influence of exomass-related metal artefacts on the detection of simulated vertical root fracture (VRF) in cone-beam computed tomography (CBCT). METHODS: 20 teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in an empty socket of a human mandible. Metallic materials were differently arranged in the exomass [zone outside of the field of view (FOV) but between the X-ray source and the receptor] and/or endomass (zone inside of the FOV), and CBCT scans were obtained. Four radiologists evaluated the presence of VRF using a 5-point scale. Sensitivity, specificity, and area under the receiver operating curve (AUC) were compared using ANOVA. Also, the tooth of interest was replaced with a tube filled with a radiopaque solution and all CBCT scans were repeated to analyse the data objectively. Mean grey and noise values were obtained from the tube and compared using ANOVA followed by Tukey's test (α = 0.05). RESULTS: Mean grey values were significantly lower and noise was significantly higher when metallic materials were present in the endomass or both the exomass and endomass. Sensitivity, specificity, and AUC were not influenced by the artefacts from the metallic materials irrespective of the arrangement condition. CONCLUSIONS: Exomass-related metal artefacts did not influence the diagnosis of simulated VRF in CBCT.

Transcriptional and Physiological Analyses to Assess the Effects of a Novel Biostimulant in Tomato.

This work aimed to study the effects in tomato (Solanum lycopersicum L.) of foliar applications of a novel calcium-based biostimulant (SOB01) using an omics approach involving transcriptomics and physiological profiling. A calcium-chloride fertilizer (SOB02) was used as a product reference standard. Plants were grown under well-watered (WW) and water stress (WS) conditions in a growth chamber. We firstly compared the transcriptome profile of treated and untreated tomato plants using the software RStudio. Totally, 968 and 1,657 differentially expressed genes (DEGs) (adj-p-value < 0.1 and |log2(fold change)| ≥ 1) were identified after SOB01 and SOB02 leaf treatments, respectively. Expression patterns of 9 DEGs involved in nutrient metabolism and osmotic stress tolerance were validated by real-time quantitative reverse transcription PCR (RT-qPCR) analysis. Principal component analysis (PCA) on RT-qPCR results highlighted that the gene expression profiles after SOB01 treatment in different water regimes were clustering together, suggesting that the expression pattern of the analyzed genes in well water and water stress plants was similar in the presence of SOB01 treatment. Physiological analyses demonstrated that the biostimulant application increased the photosynthetic rate and the chlorophyll content under water deficiency compared to the standard fertilizer and led to a higher yield in terms of fruit dry matter and a reduction in the number of cracked fruits. In conclusion, transcriptome and physiological profiling provided comprehensive information on the biostimulant effects highlighting that SOB01 applications improved the ability of the tomato plants to mitigate the negative effects of water stress.

Autistic patients: a retrospective study on their dental needs and the behavioural approach.

INTRODUCTION: Autism spectrum disorder (ASD) is a lifelong heterogeneous psychiatric disorder that represents a challenge for dentists. The aim of this retrospective study was to analyse ASD patients' dental needs and to investigate key factors influencing the behavioural management. MATERIALS AND METHODS: One hundred eighteen ASD subjects (levels 2 and 3 of the DSM-5), adults and children, treated at university dental hospital, were included. For each of them, an index card was created to record general and medical information, dental care progress and treatment management. Data were analysed to characterize this specific population in terms of dental needs, technical approach and follow-up. The relationships between care approach and age (ANOVA test), care approach and concomitant pathologies as well as care approach and required treatment (chi-square test) were evaluated. RESULTS: Almost all patients required oral care. No treatment could be provided under conscious conditions. Oral premedication and/or nitrous oxide/oxygen inhalation was significantly more efficient in children and allowed conservative procedures. In adults, general anaesthesia was significantly more employed. Few patients were followed up over a long period. CONCLUSIONS: The variety of autism spectrum disorders complicates the statement of guidelines for dental care. The development of the collaboration between psychiatrics and dentists emerges as a key factor to improve the quality and the success of oral outpatient treatment. CLINICAL RELEVANCE: Oral premedication and/or nitrous oxide/oxygen inhalation at high dose represented a good way to carry out conservative dental cares, with a significant efficiency in children. Nevertheless, in a considerable number of ASD patients, especially in adults, general anaesthesia could not be avoided.

Update on a rare mandibular osteolytic lesion in childhood: the buccal bifurcation cyst.

Buccal bifurcation cyst is a rare, uncommon buccal cystic lesion associated with the permanent mandibular first molar in children just prior to tooth eruption, and is categorized by the World Health Organization as an odontogenic cyst occurring in a vital tooth, near the buccal cervical margin of the lateral aspect of a root, as a result of an inflammatory process in a periodontal pocket. The aim of this study is to present a series of three similar mandibular buccal bifurcation cyst cases, by providing clinical, radiological and histological characterization of the lesion, in order to lead clinicians through the diagnosis, treatment and follow-up process and contribute to deeper knowledge of this rare pathological entity.

Presence of L701 M mutation in the FKS1 gene of echinocandin-susceptible Candida krusei isolates.

Resistance of Candida krusei isolates to echinocandins, the recommended drugs to treat candidemia, has been associated with mutations in hot spot (HS) regions of the FKS1 gene or L701 M mutation in a region between HS1 and HS3 of FKS1. However, the role of L701 M mutation alone in causing reduced echinocandins susceptibility is still unclear. We analyzed a region between HS1 and HS3 of FKS1 of 25 C. krusei isolates from clinical samples. Susceptibility to echinocandins was determined by a commercial broth microdilution assay and by the microdilution method according to the European Committee on Antimicrobial Susceptibility Testing (EUCAST). The L701 M mutation was detected in 22/25 (88%) C. krusei isolates with low MIC values in the absence of other HS mutations. The presence of isolated L701 M mutation in C. krusei clinical isolates susceptible to echinocandins suggests that this mutation may be just associated to polymorphism in the C. krusei population.

Cleft palate with/without cleft lip in French children: radiographic evaluation of prevalence, location and coexistence of dental anomalies inside and outside cleft region.

INTRODUCTION: Prevalence of dental anomalies in cleft patients is higher than that in general population. The objectives of this study were to assess the prevalence of dental anomalies and their coexistence in French children with cleft and, then, to investigate the relation between the dental anomalies and the cleft type. MATERIAL AND METHODS: Seventy-four non-syndromic cleft patients (6-16 years old) from Lille Regional University and Mondor-Chenevier Hospitals (France) were included. Clefts were classified as right/left unilateral cleft lip and palate (UCLP), bilateral cleft lip and palate (BCLP) and cleft palate (CP). Dental anomalies were investigated on panoramic radiographs and categorized as agenesis, supernumerary teeth, incisor rotations, impacted canines and shape anomalies. Prevalence and gender distribution of dental anomalies, mean number of affected teeth per patient, agenesis occurrence and location, and coexistence of dental anomalies were analysed by cleft type. RESULTS: 96.0% of patients presented at least one dental anomaly (agenesis 83.8%, incisor rotations 25.7%, shape anomalies 21.6%, impacted canines 18.9%, supernumerary teeth 8.1%). BCLP patients had a higher number of affected teeth, and left UCLP patients had a higher one compared to right UCLP patients. Distribution of inside (45.3%) and outside (54.7%) cleft region agenesis was similar. Adjacent (31.8%) and not adjacent (33.3%) combined dental anomalies were often encountered. CONCLUSIONS: Dental anomalies were localized inside as well as outside cleft region and were often associated with each other. BCLP patients were more affected. CLINICAL RELEVANCE: Early radiographic evaluation allows a comprehensive diagnosis of inside and outside cleft region anomalies, required for the multidisciplinary dental treatment.

Rational design, preparation and characterization of recombinant Ag85B variants and their glycoconjugates with T-cell antigenic activity against Mycobacterium tuberculosis.

Tuberculosis is the deadliest infectious disease in the world. The variable efficacy of the current treatments highlights the need for more effective agents against this disease. In the past few years, we focused on the investigation of antigenic glycoconjugates starting from recombinant Ag85B (rAg85B), a potent protein antigen from Mycobacterium tuberculosis. In this paper, structural modifications were rationally designed in order to obtain a rAg85B variant protein able to maintain its immunogenicity after glycosylation. Lysine residues involved in the main T-epitope sequences (namely, K30 and K282) have been substituted with arginine to prevent their glycosylation by a lysine-specific reactive linker. The effectiveness of the mutation strategy and the detailed structure of resulting neo-glycoconjugates have been studied by intact mass spectrometry, followed by peptide and glycopeptide mapping. The effect of K30R and K282R mutations on the T-cell activity of rAg85B has also been investigated with a preliminary immunological evaluation performed by enzyme-linked immunospotting on the different variant proteins and their glycosylation products. After glycosylation, the two variant proteins with an arginine in position 30 completely retain the original T-cell activity, thus representing adequate antigenic carriers for the development of efficient glycoconjugate vaccines against tuberculosis.

Glycosylation of Recombinant Antigenic Proteins from Mycobacterium tuberculosis: In Silico Prediction of Protein Epitopes and Ex Vivo Biological Evaluation of New Semi-Synthetic Glycoconjugates.

Tuberculosis is still one of the most deadly infectious diseases worldwide, and the use of conjugated antigens, obtained by combining antigenic oligosaccharides, such as the lipoarabinomannane (LAM), with antigenic proteins from Mycobacterium tuberculosis (MTB), has been proposed as a new strategy for developing efficient vaccines. In this work, we investigated the effect of the chemical glycosylation on two recombinant MTB proteins produced in E. coli with an additional seven-amino acid tag (recombinant Ag85B and TB10.4). Different semi-synthetic glycoconjugated derivatives were prepared, starting from mannose and two disaccharide analogs. The glycans were activated at the anomeric position with a thiocyanomethyl group, as required for protein glycosylation by selective reaction with lysines. The glycosylation sites and the ex vivo evaluation of the immunogenic activity of the different neo-glycoproteins were investigated. Glycosylation does not modify the immunological activity of the TB10.4 protein. Similarly, Ag85B maintains its B-cell activity after glycosylation while showing a significant reduction in the T-cell response. The results were correlated with the putative B- and T-cell epitopes, predicted using a combination of in silico systems. In the recombinant TB10.4, the unique lysine is not included in any T-cell epitope. Lys30 of Ag85B, identified as the main glycosylation site, proved to be the most important site involved in the formation of T-cell epitopes, reasonably explaining why its glycosylation strongly influenced the T-cell activity. Furthermore, additional lysines included in different epitopes (Lys103, -123 and -282) are also glycosylated. In contrast, B-cell epitopic lysines of Ag85B were found to be poorly glycosylated and, thus, the antibody interaction of Ag85B was only marginally affected after coupling with mono- or disaccharides.

Acute isolated appendicitis due to Aspergillus carneus in a neutropenic child with acute myeloid leukemia.

We describe a case of isolated acute appendicitis due to Aspergillus carneus in a neutropenic child with acute myeloid leukemia (AML) treated according to the AIEOP AML 2002/01 protocol. Despite prophylaxis with acyclovir, ciprofloxacin and fluconazole administered during the neutropenic phase, 16 days after the end of chemotherapy the child developed fever without identified infective foci, which prompted a therapy shift to meropenem and liposomial amphotericin B. After five days of persisting fever he developed ingravescent abdominal lower right quadrant pain. Abdominal ultrasound was consistent with acute appendicitis and he underwent appendectomy with prompt defervescence. PAS+ fungal elements were found at histopathology examination of the resected vermiform appendix, and galactomannan was low positive. A. carneus, a rare species of Aspergillus formerly placed in section Flavipedes and recently considered a member of section Terrei, was identified in the specimen. Treatment with voriconazole was promptly started with success. No other site of Aspergillus localization was detected. Appendicitis is rarely caused by fungal organisms and isolated intestinal aspergillosis without pulmonary infection is unusual. To our knowledge, this is the first report of infection due to A. carneus in a child and in a primary gastrointestinal infection.

MuSK frizzled-like domain is critical for mammalian neuromuscular junction formation and maintenance.

The muscle-specific kinase MuSK is one of the key molecules orchestrating neuromuscular junction (NMJ) formation. MuSK interacts with the Wnt morphogens, through its Frizzled-like domain (cysteine-rich domain [CRD]). Dysfunction of MuSK CRD in patients has been recently associated with the onset of myasthenia, common neuromuscular disorders mainly characterized by fatigable muscle weakness. However, the physiological role of Wnt-MuSK interaction in NMJ formation and function remains to be elucidated. Here, we demonstrate that the CRD deletion of MuSK in mice caused profound defects of both muscle prepatterning, the first step of NMJ formation, and synapse differentiation associated with a drastic deficit in AChR clusters and excessive growth of motor axons that bypass AChR clusters. Moreover, adult MuSKΔCRD mice developed signs of congenital myasthenia, including severe NMJs dismantlement, muscle weakness, and fatigability. We also report, for the first time, the beneficial effects of lithium chloride, a reversible inhibitor of the glycogen synthase kinase-3, that rescued NMJ defects in MuSKΔCRD mice and therefore constitutes a novel therapeutic reagent for the treatment of neuromuscular disorders linked to Wnt-MuSK signaling pathway deficiency. Together, our data reveal that MuSK CRD is critical for NMJ formation and plays an unsuspected role in NMJ maintenance in adulthood.

Allergic fungal rhinosinusitis due to Curvularia lunata.

We report a case of Curvularia lunata infection in an immunocompetent male with an initial diagnosis of suspected left side allergic fungal rhinosinusitis (AFRS), treated surgically. He had a relapse of nasal polyposis and underwent a surgical revision under local anaesthesia with endoscopic nasal polypectomy. The histological examination of the surgical specimen showed an inflammatory polyp of the paranasal sinuses, with eosinophil and lymphocyte infiltration, but without evidence of fungi. However, Curvularia spp fungus grew in cultures of nasal sinus drainage and bioptical specimens. The fungus was identified by DNA sequencing as C. lunata. The patient was then treated with itraconazole (200 mg BID for 4 weeks), mometasone furoate nasal spray (100 mcg BID for 6 months) and normal saline nasal irrigations. At the last follow-up endoscopic evaluation after 19 month from treatment, the patient was symptomless and free from disease. No polyp recurrence nor seromucous discharges were noticed. This first case of C. lunata-associated AFRS reported in Italy, highlights the difficulty of this diagnosis and the usefulness of molecular identification of the fungal species involved.

Optimizing Escherichia coli as a protein expression platform to produce Mycobacterium tuberculosis immunogenic proteins.

BACKGROUND: A number of valuable candidates as tuberculosis vaccine have been reported, some of which have already entered clinical trials. The new vaccines, especially subunit vaccines, need multiple administrations in order to maintain adequate life-long immune memory: this demands for high production levels and degree of purity. RESULTS: In this study, TB10.4, Ag85B and a TB10.4-Ag85B chimeric protein (here-after referred as full)--immunodominant antigens of Mycobacterium tuberculosis--were expressed in Escherichia coli and purified to homogeneity. The rational design of expression constructs and optimization of fermentation and purification conditions allowed a marked increase in solubility and yield of the recombinant antigens. Indeed, scaling up of the process guaranteed mass production of all these three antigens (2.5-25 mg of pure protein/L cultivation broth). Quality of produced soluble proteins was evaluated both by mass spectrometry to assess the purity of final preparations, and by circular dichroism spectroscopy to ascertain the protein conformation. Immunological tests of the different protein products demonstrated that when TB10.4 was fused to Ag85B, the chimeric protein was more immunoreactive than either of the immunogenic protein alone. CONCLUSIONS: We reached the goal of purifying large quantities of soluble antigens effective in generating immunological response against M. tuberculosis by a robust, controlled, scalable and economically feasible production process.

Comparative evaluation of the accuracy of linear measurements between cone beam computed tomography and 3D microtomography.

OBJECTIVE: The aim of this study was to evaluate the influence of artifacts on the accuracy of linear measurements estimated with a common cone beam computed tomography (CBCT) system used in dental clinical practice, by comparing it with microCT system as standard reference. MATERIALS AND METHODS: Ten bovine bone cylindrical samples containing one implant each, able to provide both points of reference and image quality degradation, have been scanned by CBCT and microCT systems. Thanks to the software of the two systems, for each cylindrical sample, two diameters taken at different levels, by using implants different points as references, have been measured. Results have been analyzed by ANOVA and a significant statistically difference has been found. RESULTS AND DISCUSSION: Due to the obtained results, in this work it is possible to say that the measurements made with the two different instruments are still not statistically comparable, although in some samples were obtained similar performances and therefore not statistically significant. CONCLUSION: With the improvement of the hardware and software of CBCT systems, in the near future the two instruments will be able to provide similar performances.